부품 정보
3/8 in. Diameter hole 2 5/8 in. Deep 1st end, c'bored 1/2 in. Diameter by 1 1/8 in. Deep; groove 0.010 in. Wide shaft center
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Slotted
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Two cross drilled holes and externally threaded
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.969 inches
First End Slot Width:
0.250 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
1.1800 inches
First End Slot Depth:
0.156 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
0.5000 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the second end,and terminates at the circumference.AMGS
Second End Hole Diameter:
Between 0.1250 inches and 0.1520 inches
Second End Distance From Hole Center To End:
0.187 inches
Second End External Thread Length:
0.407 inches
MRC:
A measurement between specified points of the hole at the second end,in distinction from height.AMHD
Second End Hole Depth:
0.500 inches
Second End Distance Between Hole Centers:
0.700 inches
Second End Angle Between Holes:
90.0 degrees
MRC:
The number of steps provided.ATPC
Step Quantity:
5
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
1.180 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4130
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm-a304 assn standard single material response or mil-s-6758 cond f military specification single material response
