MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Three circular grooves
First End Groove Width:
Between 0.0950 inches and 0.0970 inches
First End Groove Diameter:
Between 0.9740 inches and 0.9940 inches
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Two circular grooves, splined and internally threaded
Second End Groove Width:
0.1750 inches
Second End Groove Diameter:
0.9062 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
6.375 inches
First End Distance From End To Groove:
0.085 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 1.1100 inches and 1.1200 inches
First End Distance Between First And Second Groove Centers:
0.247 inches
First End Distance Between Second And Third Groove Centers:
0.257 inches
Second End Distance From End To Groove:
0.5938 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 1.2495 inches and 1.2500 inches
MRC:
A measurement of the longest dimension of the second end spline,in distinction from width.AMGA
Second End Spline Length:
0.594 inches
MRC:
The length of a straight line which passes through the center of the smallest circular cross section of the second end spline,and terminates at the circumference.AMGB
Second End Spline Minor Diameter:
Between 0.9630 inches and 0.9730 inches
MRC:
The length of a straight line which passes through the center of the largest circular cross section of the second end spline,and terminates at the circumference.AMGC
Second End Spline Major Diameter:
Between 1.1230 inches and 1.1240 inches
MRC:
A measurement of the extent of complete /full/ internal threads,along a line parallel to the longitudinal axis of the second end.AMHP
Second End Internal Thread Length:
1.000 inches
Second End Distance Between First And Second Groove Centers:
0.762 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
15
Second End Spline Quantity:
10
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
1.400 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1018 or steel comp 1117
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm a108 assn standard 1st material response or qq-s-637 federal specification 2nd material response