MRC:
The process used in manufacturing the item.AARN
Fabrication Method:
Cold rolled
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
4.000 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
8.000 feet
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
0.0239 inches
MRC:
A measurement of the cross section taken at right angles to the length,in distinction from thickness.ADWH
Cross-sectional Width:
4.000 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the basic appearance of the item.AGTA
Basic Shape Style:
Solid
MRC:
Indicates the type of edge on the item.AQQR
Edge Type:
Sheared
MRC:
The weight of the item with respect to a unit of measure.BRFD
Weight Per Unit Measure:
1.000 pounds per square foot
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
Not rated
MRC:
The stress at which a material exhibits a specified limiting deviation from the proportionality of stress or strain.CQHQ
Minimum Yield Strength:
Not rated
MRC:
A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.HEAT
Heat Treatment:
Hard
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, qq-s-700
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1025 or steel comp 1030 or steel comp 1035 or steel comp 1045 or steel comp 1050 or steel comp 1055 or steel comp 1065 or steel comp 1074 or steel comp 1084 or steel comp 1085 or steel comp 1086 or steel comp 1095 or steel comp 1080
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-700 federal specification 1st material response
MRC:
The condition of the item with respect to the texture of the surface.SFCD
Surface Condition:
Dull
MRC:
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.ZZZT
Specification Or Standard:
Cold rolled sheet form and d temper
