부품 정보
If using stainless steel, multiply load and deflection rate by .833
TXT
묘사:
Compression Helical Spring
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
0.084 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
E4 spring end, squared and ground both ends
MRC:
The length of a straight line which passes through the center of the stock,and terminates at the circumference.ACVU
Stock Diameter:
0.018 inches
Spring Free Length:
0.310 inches
MRC:
The number of coils included on the item.APCN
Coil Quantity:
6-3/4
MRC:
The rated load the item is designed to accommodate.ASZD
Load Rating:
Between 2.3076 pounds and 2.8204 pounds
Spring Solid Length:
0.157 inches
Spring Solid Outside Diameter:
Between 0.115 inches and 0.125 inches
MRC:
An indication of the coil helix direction.AXLH
Coil Helix Direction:
Left-hand or right-hand
MRC:
The weight,per specific measurement scale,required to deflect the spring.AXLP
Spring Deflection Rate:
Between 19.710 pounds per inch and 24.090 pounds per inch
Spring Free Outside Diameter:
Between 0.115 inches and 0.125 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm a228 assn standard single material response or astm a580 assn standard single material response or astm a313 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-416, ty ii, cl 2 assn standard single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Cylindrical