부품 정보
Spring is for applications below 30 pounds
TXT
묘사:
Extension Helical Spring
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
0.298 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
Short twisted hook both ends
MRC:
The length of a straight line which passes through the center of the stock,and terminates at the circumference.ACVU
Stock Diameter:
0.031 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Interim armored vehicle (iav), contractor logistics support (cls)
Spring Free Length:
1.187 inches
MRC:
The number of coils included on the item.APCN
Coil Quantity:
16
MRC:
Indicates the design type of the item.APGF
Design Type:
Closed
MRC:
The rated load the item is designed to accommodate.ASZD
Load Rating:
3.60 pounds
MRC:
An indication of the coil helix direction.AXLH
Coil Helix Direction:
Right-hand or left-hand
MRC:
The weight,per specific measurement scale,required to deflect the spring.AXLP
Spring Deflection Rate:
2.430 pounds per inch
Spring Free Outside Diameter:
Between 0.352 inches and 0.368 inches
Hook Radius:
0.180 inches both ends
MRC:
An indication of the angular relationship of the ends of the item.AXMH
End Angular Relationship:
Ends parallel one to other
MRC:
The specific extended or compressed spring length under maximum load.CSZP
Spring Length Under Load:
1.300 inches
Coil To Hook Inside Length:
0.380 inches both ends
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-w-470 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Zinc
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-z-325, ty ii, cl 3 federal specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Cylindrical
