MRC:
Indicates the maxmium slope of grain in relation to the length of the item.CQHF
Maximum Grain Slope:
Any acceptable
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.CQKJ
Random Width:
3 in. And wider, permitting 5 pct 3 in. And requiring 60 pct 6 in. And wider
MRC:
An indication of the species and grade of the item,and the grading association.CQWY
Species-grade And Grading Association:
Oak, white 1 common national hardwood lumber association
MRC:
The moisture content retained in the item after seasoning,expressed in percent.CRCL
Moisture Content Retention Percentage:
12.0
MRC:
A measurement of the longest dimension of an item,in distinction from width.CRJD
Random Length:
4 feet and longer, permitting 10 pct 4-7 feet of which one @half may be 4-5 feet and requiring 30 pct 14 feet and longer
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness,its location on the item,and the measuring method used.CRPW
Width-location And Measuring Method:
3.000 inches random
MRC:
The means used and the measurement of the longest dimension of an item.CRXX
Measuring Method And Length:
4.000 feet random
MRC:
The extent of surface dressing or roughness of the item.CRYQ
Surface Condition Degree:
Rough-unsanded full length
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width,its location on the item,and the measuring method used.CSHP
Thickness-location And Measuring Method:
1.000 inches specified
MRC:
The required purpose or application of the typical wood products for which the item is intended.CSTS
Typical Wood Products Use:
Cutting grades for remanufacture
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Typical use--for remanufacture compass and accommodation ladder platforms, pallets, crates, unit of issue--board foot
