부품 정보
End opposite drilled face reduced to 1-9/32 in. Diameter by 3/32 in. Porm 1/64 long and counter bored to 1-1/16 in. Diameter by 3/32 in. Porm 1/64 in. Deep and end opposite drilled face slotted 1/8 in. Wide by 3/32 in. Porm 1/64 deep 90 degrees apart
TXT
묘사:
Externally Threaded Ring
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
Indicates whether or not a ferrous alloy object has been subjected to a process whereby the outer portion is made substantially harder than the inner portion or core.AASG
Casehardening Indicator:
Not casehardened
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
0.313 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
0.188 inches
MRC:
Designates the thread diameter and number of threads per specific measurement scale.ABUJ
Thread Size:
1-3/8 in. -16 thd size
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
0.625 inches
MRC:
A linear measurement from the surface to a specified inner point on an item,in distinction from height.AEJZ
Depth:
0.125 inches
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Straight
MRC:
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.AJYP
Screw Thread Series Designator:
16n
MRC:
Indicates the type of drive for turning,rotating,or positioning the mechanism.AKCV
Drive Type:
Drilled face
MRC:
Indicates the type and number of accommodations included.AWHW
Accommodation Type And Quantity:
4 holes
MRC:
The angle between accommodations,expressed in degrees.AWPF
Angle Between Accommodations In Deg:
90.0
MRC:
The measurement of a straight line from the center of the item to the center of the accommodation.AWPG
Radius From Geometric Axis To Accommodation:
0.516 inches
MRC:
An indication of whether or not a beveled thread is included.AWPH
Beveled Thread:
Not included
MRC:
An indication of whether or not a bore annular internal serration/s/ is included.AWPK
Bore Annular Internal Serration:
Not included
MRC:
An indication of whether or not a setscrew locking notch is included.AWPL
Setscrew Locking Notch:
Not included
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, n, 46-s-17, class 1 or steel, n, 46-s-17, class 2
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1115 or steel comp 1117 or steel comp 1120 or steel comp 1211 or steel comp 1212
