부품 번호:
l30-25-m-ff-180-s1-o-h
부품 정보
Max radial capacity: 5000.0 pounds; max thrust capacity: 4000.0 pounds; displacement: 42.000 cubic inches; approximate weight: 110.0 pounds; length non-rotating: 11.3 inches ; diameter shaft and endcap flanges: 6.1 inches; diameter bolt circle: 5.000 inches; mounting holes, shaft flange: 5/8-11
TXT
묘사:
Rot Hydraulic-pneumatic Actuator
MRC:
The provision/s/ for mounting the item.ABDR
Mounting Provision:
Unthreaded mounting holes
MRC:
The length of a straight line which passes through the center of an item,and terminates at the outside circumference.ABHE
Outside Diameter:
6.000 inches all ports
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
7.300 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
10.600 inches
MRC:
The direction of rotation of a rotating shaft as viewed from the drive end.AKCT
Shaft Rotation Direction:
Clockwise
MRC:
The rated torque of the output drive.AWQM
Output Drive Torque Rating:
25000.0 inch-pounds
MRC:
The pressure at which an item is designed to operate.BGST
Pressure Rating:
62500.0 pounds per square inch
MRC:
The measurement of rotation,expressed in degrees.BLFW
Rotation In Deg:
180.0
MRC:
The means used to operate the integral valve.CKRM
Integral Valve Operation Method:
Hydraulic or pneumatic
MRC:
An indication of the design characteristics of the item.CKSD
Design Characteristics:
Single acting single cylinder
MRC:
Indicates the type of mounting and the location on the item.CLML
Mounting Type And Location:
Flange cylinder head end
MRC:
The length of a straight line which passes through the center of the mounting facility,and terminates at the circumference.CLMQ
Mounting Facility Diameter:
8.100 inches