TXT
묘사:
Nonmetallic Channel
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Semi-closed channel
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-65.0 degrees fahrenheit and 400.0 degrees fahrenheit
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.125 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.622 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
72.000 inches
Right Side Flange Height:
0.125 inches
Left Side Flange Thickness:
0.054 inches
Right Side Flange Thickness:
0.054 inches
Left Side Top Flange Thickness:
0.045 inches
Right Side Top Flange Thickness:
0.045 inches
Left Side Top Flange Width:
0.194 inches
Right Side Top Flange Width:
0.194 inches
Outer Radius Where Left Flange Joins Top Flange:
0.030 inches
Fillet Radius Where Left Flange Joins Top Flange:
0.010 inches
Outer Radius Where Right Flange Joins Top Flange:
0.030 inches
Fillet Radius Where Right Flange Joins Top Flange:
0.010 inches
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Low temperature and high temperature
Fillet Radius Where Left Flange Joins Base Flange:
0.010 inches
Outer Radius Where Left Flange Joins Base Flange:
0.030 inches
Base Flange Thickness:
0.045 inches
Outer Radius Where Right Flange Joins Base Flange:
0.030 inches
Fillet Radius Where Right Flange Joins Base Flange:
0.010 inches
MRC:
The style designation corresponding to the shape of the left-side flange tip.BHQU
Left-side Flange Tip Style:
Left square end
MRC:
The style designation corresponding to the shape of the right-side flange tip.CZLZ
Right-side Flange Tip Style:
Right square end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber silicone
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
980b457, kirkhill rubber co mfr ref single material response
