부품 정보
Has 4 hols 0.618 to 0.714 in. Dia, 2 holes 0.201 to 0.205 in. Dia, 7 holes 0.159 to 0.163 in. Dia; 1 side beveled 1.600 by 45 deg, 3 corners beveled 0.250 by 45 deg
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
4.440 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
3.250 inches
Distance Between Hole Centerline And First Hole Along Length:
0.470 inches
Distance Between Hole Centerline And First Hole Along Width:
1.312 inches
Distance From First Hole Centerline To End Along Length:
0.280 inches
Distance From First Hole Centerline To End Along Width:
0.310 inches
MRC:
The length of a linear break at an angle to the surfaces forming the edge.ADPE
Corner Bevel Length:
0.280 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.063 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Special
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/11 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Chromate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-c-5541 cl3 military specification single treatment response
