TXT
묘사:
Packing With Retainer
MRC:
The length of a straight line which passes through the center of an item,and terminates at the outside circumference.ABHE
Outside Diameter:
0.625 inches
MRC:
A measurement of the smallest dimension of the retainer,in distinction from length or width.ADTJ
Retainer Thickness:
Between 0.062 inches and 0.065 inches
MRC:
The length of a straight line which passes through the center of the packing ring in cross section,and terminates at the circumference.ADTK
Packing Ring Cross-sectional Diameter:
Between 0.104 inches and 0.124 inches
MRC:
The length of a straight line which passes through the center of a retainer,and terminates at the inside circumference.AFFW
Retainer Inside Diameter:
0.312 inches
MRC:
The length of a straight line which passes through the center of the packing,and terminates at the inside circumference.AFFX
Packing Inside Diameter:
Between 0.245 inches and 0.255 inches
MRC:
The structural characteristic of the item.CQCF
Construction:
Two-piece
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber butadiene-acrylonitrile class nbr packing
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Sae j120, 10r4, gr sc815 e1, e3, k1 assn standard single material response packing
