부품 정보
90.0 degrees angle formed in cover
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.209 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
4.500 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, four holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
8.000 inches
MRC:
A measurement of a straight line from the midpoint of a rounded corner to its periphery.ADNU
Corner Radius:
0.120 inches
Distance Between Holes Along Length:
7.000 inches
Distance Between Holes Along Width:
4.000 inches
Distance From First Hole Centerline To End Along Length:
0.500 inches
Distance From First Hole Centerline To End Along Width:
0.250 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.032 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Special
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 5052
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/8 h32 federal specification single material response
