부품 정보
23 threaded holes, 0.138-32 unc-2b, countersunk 0.340 x 100 deg; 3 holes near the middle; requested name - cover, chassis-top
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Recess, same shape as the periphery
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
5.280 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.060 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, multi holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
13.310 inches
Hole Quantity Along Length:
16
Hole Quantity Along Width:
9
Distance Between Holes Along Length:
1.410 inches
Distance Between Holes Along Width:
1.150 inches
Distance From First Hole Centerline To End Along Length:
0.310 inches
Distance From First Hole Centerline To End Along Width:
0.170 inches
First Recess Inside Height:
0.060 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.125 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Threaded fastener
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Threaded hole
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F-16
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/11 federal specification single material response
