부품 정보
1st leg contains steel tubing thru, 0.312 in. Outside dia, 0.560 in. Min to 0.580 in. Maximum lg, 1st leg is chamfered, 2nd leg is chamfered, 0.080 in. Min to 0.120 in. Maximum by 45.0 degrees in 2 places
MRC:
Indicates the type of holes provided in the item to facilitate mounting to another item.ACHY
Mounting Hole Type:
Plain
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
Between 0.860 inches and 0.880 inches
Second Leg Width:
Between 0.610 inches and 0.630 inches
First Leg Hole Diameter:
0.270 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
Between 0.050 inches and 0.062 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
Between 0.050 inches and 0.062 inches
First Leg Width:
Between 0.610 inches and 0.630 inches
First Leg Distance From Edge To Hole Center Along Width:
Between 0.300 inches and 0.320 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Chamfered ends
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
One hole
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
No hole
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Not identical
First Leg Angle:
Between 90.0 degrees and 92.0 degrees
First Leg Chamfer Angle:
Between 58.0 degrees and 62.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5510 national specification 1st material response and ams5557 national specification 2nd material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Angle
