부품 정보
First end longitudinal drill hole: 0.500in. Diameter 1.827 in. Maximum depth threaded 1.477 in. Min thd depth 0.500-20unf-2b; second end longitudinal drill hole 0.3025 in. Min 0.3225 in. Maximum dia. 2.200 in. Min 2.250 in. Maximum depth
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Circular grooved
First End Groove Width:
0.1870 inches
First End Groove Diameter:
Between 2.5530 inches and 2.5630 inches
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Unthreaded cross drilled
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 7.440 inches and 7.480 inches
First End Distance From End To Groove:
0.493 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 2.7732 inches and 2.7738 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 1.9362 inches and 1.9368 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the second end,and terminates at the circumference.AMGS
Second End Hole Diameter:
0.1250 inches
Second End Distance From Hole Center To End:
2.038 inches
MRC:
A measurement between specified points of the hole at the second end,in distinction from height.AMHD
Second End Hole Depth:
0.968 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
5
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
Between 2.770 inches and 2.774 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
50.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 8625
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-624 federal specification all material responses