부품 정보
Second end outside diameter 7 5/32 inches. 16 holes drilled and tapped 3/8 inch on a 5 1/2 inch bolt circle, first end. 16 holes drilled 9/16 inch on a 5.905 inch bolt circle, second end. All holes equally spaced. To be installed tailshaft to hub as outer oil tube
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Plain round
MRC:
A measurement of the smallest dimension of the wall,in distinction from length or width.AAGT
Wall Thickness:
0.312 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Flange
First End Flange Outside Diameter:
6.500 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
4.000 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Used as outer oil tube reduction gear shaft 378 ft whec coast guard vessels
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Identical
MRC:
The structural characteristic of the item.CQCF
Construction:
Seamless
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
2000.0 pounds per square inch
MRC:
The means used and the measurement of the longest dimension of an item.CRXX
Measuring Method And Length:
112.109 inches specific
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
