MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Square or rectangular recess
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.246 inches and 0.260 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
Between 11.813 inches and 11.938 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, multi holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
Between 14.188 inches and 14.313 inches
Hole Quantity Along Length:
2
Hole Quantity Along Width:
6
Distance Between Holes Along Length:
Between 6.802 inches and 6.822 inches
Distance Between Holes Along Width:
Between 5.615 inches and 5.635 inches
Distance From First Hole Centerline To End Along Length:
Between 0.303 inches and 0.323 inches
Distance From First Hole Centerline To End Along Width:
Between 0.303 inches and 0.323 inches
First Recess Inside Height:
Between 2.340 inches and 2.540 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
Between 0.375 inches and 0.500 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Threaded fastener
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
Inside Angle:
45.0 degrees
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Enamel
