부품 정보
Mtg hole pitch diameter 0.3911 in. Min, 0.3947 in. Max
TXT
묘사:
Transfer Transmission Assembly
MRC:
The number of threads per inch on the mounting.AAMQ
Mounting Threads Per Inch:
14
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
14.000 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
10.000 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
12.000 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.312 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
2
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal threaded mounting hole.ACJB
Mounting Hole Thread Class:
Any acceptable
MRC:
The number of bolt holes in the mounting flange.ADML
Mounting Flange Bolt Hole Quantity:
4 and 4
MRC:
The spacing between the mounting holes.ALXY
Mounting Hole Spacing:
10-1/2 in. C to c
MRC:
The length of a straight line which passes through the center of the flange bolt hole,and terminates at the circumference.ARZJ
Flange Bolt Hole Diameter:
0.250 inches
MRC:
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of specific diameters of a threaded mounting.ATGD
Mounting Thread Series:
Unc
MRC:
The spacing of the flange bolt hole/s/.AXAR
Flange Bolt Hole Spacing:
Bolt holes evenly spaced on 2-1/16 in. Bolt circle
MRC:
A measurement taken at right angles to the length of the flange mounting face,in distinction from thickness.BNXB
Flange Mounting Face Width:
1.875 inches and 2.250 inches
MRC:
A measurement of the longest dimension of the flange mounting face,in distinction from width.BNXC
Flange Mounting Face Length:
2.125 inches and 2.375 inches
MRC:
Indicates the location of the output flange/s/ on the item.BNXD
Err Default:
Err default
MRC:
Indicates the location of the output flange/s/ on the item.BNXD
Output Flange Location:
On front and rear output shafts
MRC:
Indicates the type of input shaft end provided.BNZR
Input Shaft End Type:
Splined
MRC:
The number of output shaft end(s) provided.BNZX
Output Shaft End Quantity:
2
MRC:
Indicates the type of output shaft end provided.BNZY
Output Shaft End Type:
Flanged
MRC:
The length of a straight line which passes through the center of the flange mounting face,and terminates at the outside circumference.BNZZ
Err Default:
Err default
