부품 정보
Component board, stabilator/sas test unit
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.AAMA
Mounting Hole Diameter:
0.156 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Strip type
MRC:
The number of terminal rows or terminal provisions included on the item.ABCS
Terminal Row Quantity:
6
MRC:
The center to center distance between terminals.ABCT
Center To Center Distance Between Terminals:
0.313 inches
MRC:
The distance between the terminal row centers.ABCU
Distance Between Terminal Row Centers:
0.037 inches
MRC:
The structural characteristic(s) of the board.ABCX
Board Construction:
Solid construction
Center To Center Distance Between Mounting Facilities Parallel To Length:
4.500 inches
Center To Center Distance Between Mounting Facilities Parallel To Width:
3.000 inches
Distance From Bottom Edge Of Terminal Board To Center Of Mounting Hole:
0.250 inches
Distance From Left Edge Of Terminal Board To Center Of First Mounting Facility:
0.250 inches
Boardlength:
5.000 inches
Board Thickness:
0.090 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Stabilator/sas test
MRC:
Indicates the type and number of facilities by which the item is mounted.AXHR
Mounting Facility Type And Quantity:
4 unthreaded hole
MRC:
The arrangement of terminal positions on the item.CWLG
Terminal Pattern Arrangement:
Multi-row
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
6 rows of terminals, centered: 0.380, 1.380, 1.750, 2.750. 2.750, 3.120 and 4.120 inches above bottom mounting holes
MRC:
Markings included on an item for the purpose of offering instructions or warnings or to indicate the purpose,function,or application of the item.excludes manufacturers part numbers,symbols,or the like.MARK
Special Markings:
With short end up, on front: "r designation" centered on top edge and numerals from 1 to 9 in ascending order from left to right above top row of terminals and "a4" centered on bottom edge; on back: "terminal desig" centered on top edge and numerals from 9 to 1 in descending order from left to right above the top row of terminals
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic epoxy board and glass fiber board
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-p-18177. Type gee military specification single material response board
