부품 정보
Component board, stabilator/sas test unit
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.AAMA
Mounting Hole Diameter:
0.156 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Strip type
MRC:
The number of terminal rows or terminal provisions included on the item.ABCS
Terminal Row Quantity:
6
MRC:
The center to center distance between terminals.ABCT
Center To Center Distance Between Terminals:
0.750 inches
MRC:
The distance between the terminal row centers.ABCU
Distance Between Terminal Row Centers:
0.375 inches
MRC:
The structural characteristic(s) of the board.ABCX
Board Construction:
Solid construction
Center To Center Distance Between Mounting Facilities Parallel To Length:
4.500 inches
Center To Center Distance Between Mounting Facilities Parallel To Width:
3.000 inches
Distance From Bottom Edge Of Terminal Board To Center Of Mounting Hole:
0.250 inches
Distance From Left Edge Of Terminal Board To Center Of First Mounting Facility:
0.250 inches
Boardlength:
9.500 inches
Board Thickness:
0.090 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Stabilator/sas test unit
MRC:
Indicates the type and number of facilities by which the item is mounted.AXHR
Mounting Facility Type And Quantity:
6 unthreaded hole
MRC:
The arrangement of terminal positions on the item.CWLG
Terminal Pattern Arrangement:
Multi-row
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
M1 column of terminals along left edge (see marking for spacing), 6 rows of 3 terminals centered, 0.38, 0.76, and 4.18 inches above bottom mounting holes, and 0.38, 0.76 and 4.18 inches above middle mounting holes
MRC:
Markings included on an item for the purpose of offering instructions or warnings or to indicate the purpose,function,or application of the item.excludes manufacturers part numbers,symbols,or the like.MARK
Special Markings:
With short end up, on front: "cr designator" across top edge, letters "a b c d" equally spaced above first row of terminals, "a3" centered along bottom edge, and numerals from 22 to 12 in descending order from bottom edge up, along left edge, beginning 0.38 inch above bottom mounting hole and spaced 0.38 inch apart, and numerals from 11 to1 in descending order from 0.38 inch above left, center mounting hole to top edge, spaced 0.38 inch apart; on back: "terminal desig" across top edge and letters "e f g h" equally spaced across first row of terminals
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Glass fiber board and plastic epoxy board
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-p-18177. Type gee military specification single material response board
