TXT
묘사:
Vehicular Universal Joint Yoke
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
Between 0.562 inches and 0.567 inches
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
Between 0.634 inches and 0.654 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
19
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
T-56 aircraft engine
MRC:
A measurement taken at right angles to the length of a fork,in distinction from thickness.AGBT
Fork Width:
Between 0.674 inches and 0.675 inches
MRC:
The measurement between specified points of the fork,in distinction from height.AKYX
Fork Depth:
0.750 inches
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
0.760 inches
MRC:
A measurement from the bottom to the top of the fork, in distinction from depth.BRGT
Fork Height:
Between 1.234 inches and 1.235 inches
MRC:
Indicates the type of spline(s) on the end of the shaft.BTBR
Shaft End Spline Type:
Straight
MRC:
A measurement of the longest dimension from the centerline of the universal joint spider to the shaft end,in distinction from width.BTBS
Length From Universal Joint Spider Centerline To Shaft End:
1.250 inches
Bearing Hole Diameter:
Between 0.192 inches and 0.200 inches
MRC:
Indicates the type of connection end on the item.BYRC
Connection End Type:
Shaft
MRC:
The length of a straight line which passes through the center of the largest cross section of an internal spline, and terminates at the circumference.CZKT
Internal Hub Spline Major Diameter:
Between 0.634 inches and 0.654 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator (non-core):
Err-090
