TXT
묘사:
Headless Shoulder Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered and counterbored
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Counterbored w/o through hole
MRC:
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.AAVH
Shoulder Diameter:
Between 0.4340 inches and 0.4346 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 1.745 inches and 1.775 inches
First Step Diameter:
Between 0.600 inches and 0.620 inches
First Step Length:
Between 0.035 inches and 0.045 inches
Second Step Diameter:
Between 0.5248 inches and 0.5254 inches
Second Step Length:
Between 0.990 inches and 1.010 inches
Third Step Diameter:
Between 0.3495 inches and 0.3501 inches
Third Step Length:
Between 0.290 inches and 0.330 inches
First End Counterbore Diameter:
Between 0.245 inches and 0.255 inches
Second End Counterbore Diameter:
Between 0.245 inches and 0.255 inches
First End Counterbore Depth:
Between 0.210 inches and 0.270 inches
Second End Counterbore Depth:
Between 0.770 inches and 0.830 inches
First End Taper Length:
Between 0.040 inches and 0.060 inches
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Not identical
MRC:
Indicates the location of the first end.CRDY
First End Location:
Short shank end
First End Taper Angle:
30.0 degrees
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
16.0 microinches short shank end
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches long end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5663 assn standard single material response
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Pwa256-1, pwa 474, 77445 mfr ref single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shoulder
