TXT
묘사:
Plain Tapered Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Oval
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Oval
MRC:
The length of a straight line which passes through the center of the large end,and terminates at the circumference.ABPJ
Large End Diameter:
0.1263 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
One end drilled
First Hole Diameter:
Between 0.025 inches and 0.033 inches
Distance From Centerline Of Hole To End Of Pin:
0.050 inches
MRC:
The overall dimension measured along the longitudinal axis,with terminated points at the extreme ends of the pin.ACHT
Pinlength:
0.875 inches
MRC:
A standard or measurement,expressed as a numeric value,for designating the size of the pin.ACHV
Pin Size Designation:
3/0
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Not identical
MRC:
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.CQSX
Shear Strength:
55000 single pounds per square inch
MRC:
Indicates the location of the first end.CRDY
First End Location:
Small end
First End Outer Radius:
0.054 inches
Second End Outer Radius:
0.063 inches
MRC:
The amount of taper measured parallel to the longitudinal axis of the pin per measurement scale.CWGB
Pin Taper:
0.0180 per foot in inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ms24692 military standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Carbon
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-416, type 2 federal specification single treatment response
