부품 정보
Spline minor diameter 0.637 in. Nom; spline height 0.056 in. Nom
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Webbed, with lightening holes
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
6 both ends
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
3.9470 inches
MRC:
The number of teeth included on the item.AJLA
Teeth Quantity:
62
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style:
Straight spline both ends
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
4.1690 inches
MRC:
The nominal dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.CWFR
Nominallength:
1.0000 inches
MRC:
The direction the teeth curve when viewed from the edge of the item.CWNM
Tooth Direction:
Right
MRC:
A nominal measurement of the throat radius across the face of the item.CWNP
Throat Radius:
0.520 inches
MRC:
The number of thread leads on the mating item.CWPL
Mating Thread Lead Quantity:
2
MRC:
The measurement of the pressure angle on the item.CWPP
Pressure Angle:
14.5000 degrees
MRC:
The measurement of the helix angle on the item.CWPZ
Helix Angle:
6.2267 degrees
MRC:
The nominal distance between the body face and the protruding hub end.CWQL
Distance Between Body Face And Protruding Hub End:
0.250 inches first end
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.CWRM
Face Width:
0.750 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the hub.CWTR
Hub Style Designator:
Plain both ends
MRC:
The nominal length of a straight line which passes through the center of a hub,and terminates at the circumference.CWTX
Hub Diameter:
1.250 inches first end
MRC:
The nominal length of a straight line which passes through the center of a hub,and terminates at the circumference.CWTX
Hub Diameter:
1.250 inches second end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-b-16540 gr a military specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
One protruding hub, one flush hub