TXT
묘사:
Automotive Axle Shaft
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.437 inches and 0.750 inches
MRC:
A measurement between specified points of the hole,in distinction from height.AAZQ
Hole Depth:
Between 0.500 inches and 0.750 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
32.375 inches
MRC:
The length of a straight line which passes through the center of a drilled hole,and terminates at the circumference.AGGP
Drilled Hole Diameter:
Between 0.437 inches and 0.562 inches
MRC:
The length of a straight line which passes through the center of a flange,and terminates at the outside circumference.AHTC
Flange Outside Diameter:
5.625 inches
MRC:
A measurement of the longest dimension of the second end spline,in distinction from width.AMGA
Second End Spline Length:
2.375 inches
MRC:
The length of a straight line which passes through the center of the smallest circular cross section of the second end spline,and terminates at the circumference.AMGB
Second End Spline Minor Diameter:
1.187 inches
MRC:
The length of a straight line which passes through the center of the largest circular cross section of the second end spline,and terminates at the circumference.AMGC
Second End Spline Major Diameter:
1.375 inches
MRC:
A narrative description of the first end.AMQA
First End Type:
Flanged
MRC:
A narrative description of the second end.AMQF
Second End Type:
Splined
MRC:
The number of holes provided.ASXK
Hole Quantity:
2
MRC:
Indicates the type and number of facilities by which the item is mounted.AXHR
Mounting Facility Type And Quantity:
8 unthreaded hole
MRC:
The number of second end spline(s) provided.BBCF
Second End Spline Quantity:
12
MRC:
Indicates the type of second end spline provided.BNTM
Second End Spline Type:
Straight
MRC:
Indicates the type of hole(s) provided on the end of the item.BNTX
End Hole Type:
Drilled and drilled
MRC:
A measurement of the smallest dimension of the flange at the mounting hole,in distinction from length or width.BNYT
Flange Thickness At Mounting Hole:
1.000 inches
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
