부품 정보
First leg angle in degrees 100.0 min. 104.0 max.
MRC:
The process used in manufacturing the item.AARN
Fabrication Method (non-core):
Machined
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
Between 1.060 inches and 1.080 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
Between 1.124 inches and 1.144 inches
Second Leg Width:
Between 1.709 inches and 1.749 inches
Second Leg Corner Radius:
Between 0.310 inches and 0.330 inches
First Leg Hole Diameter:
Between 0.216 inches and 0.226 inches
Second Leg Hole Diameter:
Between 0.339 inches and 0.349 inches
Second Leg Distance Between Hole Centers Along Width:
1.089 inches
Second Leg Distance Between Hole Centers Along Length:
0.034 inches
Second Leg Distance Between Hole Centers Along Length:
0.034 inches
Second Leg Distance From Edge To Hole Center Along Width:
Between 0.310 inches and 0.330 inches
Second Leg Distance From Edge To Hole Center Along Length:
Between 0.310 inches and 0.330 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
Between 0.056 inches and 0.068 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
Between 0.056 inches and 0.068 inches
First Leg Distance From Edge To Hole Center Along Width:
Between 0.240 inches and 0.260 inches
First Leg Distance From Edge To Hole Center Along Length:
Between 0.240 inches and 0.260 inches
First Leg End Radius:
Between 0.240 inches and 0.260 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
End radius and tapered
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
One hole
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
Corner radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
Two holes
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 410
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5504 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Angle
