MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
Between 2.247 inches and 2.249 inches
MRC:
The length of a straight line which passes through the center of an item,and terminates at the outside circumference.ABHE
Outside Diameter:
5.821 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.500 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
6
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.ABSC
Spline Minor Diameter:
Between 2.032 inches and 2.034 inches
MRC:
The length of a straight line which passes through the center of a drilled hole,and terminates at the circumference.AGGP
Drilled Hole Diameter:
0.252 inches
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
5.223 inches
MRC:
The number of holes provided for securing the item in a fixed position.AHYF
Securing Hole Quantity:
2
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.AQPL
Face Width:
0.692 inches
MRC:
The physical configuration of the item.ARJD
Design Form:
Plain
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
1.500 inches
MRC:
An indication of whether or not a counterbore feature is included.AXND
Counterbore Feature:
Not included
MRC:
Indicates the location of the hole on the item.BFYT
Hole Location:
Located on hub 0.625 in. From end through center of spline
MRC:
An indication of whether or not a keying facility is included.BSGG
Keying Facility:
Not included
MRC:
The means by which the item is secured.BSNP
Securing Method:
Drilled hole
MRC:
An indication of whether or not a lightening hole/s/ is included.BXSJ
Lightening Hole:
Not included
MRC:
An indication of the characteristic of the protruding hub.BYDZ
Protruding Hub Characteristic:
Plain
MRC:
Designates the belt,chain,or film size for which the item is designed.BYFH
Belt/chain/film Size For Which Designed:
Roller chain
MRC:
Indicates the type of roller chain pitch for which the item is designed.BYFJ
Roller Chain Pitch Type For Which Designed:
Single pitch
MRC:
The number of rows of teeth provided.BYFL
Teeth Row Quantity:
1
MRC:
The number of teeth included in each row.BYFN
Teeth Quantity Per Row:
13
MRC:
The american standards association number by which the chain is identified.BYFP
Asa Standard Chain Number:
60
MRC:
The means used to test the rated hardness of an item.BYFQ
Hardness Rating Test Method:
Rockwell
MRC:
An indication of whether or not a bore bearing is included.BYFS
Bore Bearing:
Not included
MRC:
An indication of whether or not a hub external keyway is included.BYFW
Hub External Keyway:
Not included
MRC:
The center to center distance between teeth measured along the pitch line.BYGF
Tooth Pitch:
1.250 inches
Hub End Outside Diameter And Location:
3.406 inches both ends
Distance From Outside Flange/rim To Hub End And Location:
0.814 inches both ends
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, mil-s-20166, type a, grade m
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1022
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-20166, type a, grade m military specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Plain
