MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Round w/wrench flats
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
4.332 inches
Offset Distance Between Geometric Center Of Head And Centerline Of Shank/shoulder:
0.090 inches
First Step Diameter:
Between 0.684 inches and 0.685 inches
First Step Length:
Between 0.703 inches and 0.713 inches
Second Step Diameter:
Between 0.4919 inches and 0.4980 inches
Second Step Length:
Between 3.474 inches and 3.484 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.ABQZ
Internal Drive Style:
Slot
MRC:
The number that designates the enlarged portion of the shank whose centerline is not collinear with the centerline of the head of an item.ACHW
Numeric Designation Of Step Eccentric To Head:
2
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
0.812 inches
Pin Head Diameter:
0.938 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches bearing
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.145 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4130
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-6758 cond d4 military specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Eccentric
