MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Two circular grooves and splined (straight_)
First End Groove Width:
0.1900 inches
First End Groove Diameter:
Between 0.4672 inches and 0.4688 inches
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Circular grooved, cross drilled hole, and externally threaded
Second End Groove Width:
0.1560 inches
Second End Groove Diameter:
Between 0.3845 inches and 0.3855 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
9.683 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Used on jacketwater pump 7l4823 onboard 270 ft wmec coast guard vessels
First End Distance From End To Groove:
1.060 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
0.7640 inches
MRC:
A measurement of the longest dimension of the first end spline,in distinction from width.AMDM
First End Spline Length:
1.060 inches
MRC:
The length of a straight line which passes through the center of the smallest circular cross section of the first end spline,and terminates at the circumference.AMDN
First End Spline Minor Diameter:
0.6200 inches
MRC:
The length of a straight line which passes through the center of the largest circular cross section of the first end spline,and terminates at the circumference.AMDP
First End Spline Major Diameter:
Between 0.6700 inches and 0.6760 inches
First End Distance Between First And Second Groove Centers:
1.562 inches
Second End Distance From End To Groove:
0.806 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
0.4930 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the second end,and terminates at the circumference.AMGS
Second End Hole Diameter:
0.1410 inches
Second End Distance From Hole Center To End:
0.170 inches
Second End External Thread Length:
0.614 inches
MRC:
A measurement between specified points of the hole at the second end,in distinction from height.AMHD
Second End Hole Depth:
0.500 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
4
First End Spline Quantity:
6
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
Between 1.247 inches and 1.253 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
