부품 정보
No 8-32 nc-2 thread studs
MRC:
The maximum voltage the insulating materials of the item will withstand without resulting in disruptive discharge or deterioration,expressed in volts.AAPB
Dielectric Withstanding Voltage In Volts:
1.5
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Barrier type
MRC:
A measurement taken at right angles to the length of a mounting slot,in distinction from thickness.AAQX
Mounting Slot Width:
0.201 inches
MRC:
The number of terminal rows or terminal provisions included on the item.ABCS
Terminal Row Quantity:
2
MRC:
The center to center distance between terminals.ABCT
Center To Center Distance Between Terminals:
0.443 inches
MRC:
The distance between the terminal row centers.ABCU
Distance Between Terminal Row Centers:
0.688 inches
MRC:
The structural characteristic(s) of the board.ABCX
Board Construction:
Hollow construction without insulated strip
Center To Center Distance Between Mounting Facilities Parallel To Length:
6.000 inches
Distance From Bottom Edge Of Terminal Board To Center Of Mounting Hole:
0.719 inches
Distance From Left Edge Of Terminal Board To Center Of First Mounting Facility:
0.250 inches
Boardlength:
6.500 inches
Boardheight:
0.812 inches
Board Height Excluding Terminals:
0.625 inches
Base Thickness:
0.375 inches
MRC:
The electrical current rating,expressed in amperes.AMPS
Current Rating In Amps:
30.0
MRC:
Indicates the type and number of facilities by which the item is mounted.AXHR
Mounting Facility Type And Quantity:
2 slot
MRC:
Indicates the type of nonfeedthru terminal furnished with the item.CRNL
Nonfeedthru Terminal Type:
599 single
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Zzzy
MRC:
The number of nonfeedthru terminals furnished with the item.CSCS
Nonfeedthru Terminal Quantity:
24 single
MRC:
The arrangement of terminal positions on the item.CWLG
Terminal Pattern Arrangement:
Multi-row
MRC:
The design of the terminal.CWLN
Terminal Design:
Nonfeedthru
MRC:
Markings included on an item for the purpose of offering instructions or warnings or to indicate the purpose,function,or application of the item.excludes manufacturers part numbers,symbols,or the like.MARK
Special Markings:
1234-56-789-1011
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy terminals
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic board and glass board
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
56232-1-1653793 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
MRC:
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.ZZZY
Reference Number Differentiating Characteristics:
Quality controlled for polaris
