TXT
묘사:
Cellular Plastic Material
MRC:
An indication of whether or not an object will remain substantially unchanged when subjected to extremely high temperatures.AAAU
Fire Retarding Characteristic:
Not fire retarding
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
17.280 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
4.000 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
20.940 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Aircraft, thunderbolt ii, a-10
MRC:
The condition of the item with respect to the texture of the surface.APEA
Surface Condition:
Rough
MRC:
An indication of the rated density of the item.BDNZ
Density Rating:
1.2 pounds per cubic foot
MRC:
The squeezing load an item can withstand without breaking at 25 percent deflection.CTLY
Compression Strength At 25 Pct Deflection:
0.35 pounds per square inch
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Rectangular with 3 cutouts on left/short edge: 1.26wx1.24h, 2.16 from bottom & 3.30wx4.86h, 5.00 from bottom & 4.90wx3.50h, 9.10 from bottom; 2 cutouts on right edge: 2.40wx3.50h, 9.10 from bottom & 4.90wx3.50hx1.08d, 9.10 from bottom; top edge tapers 0.40 from far to near surfaces; far side has crosswise grooves: 2.32wx1.50d along top edge & 2.15wx2.36d along bottom one & lengthwise u-shaped groove beginning 3.60 from left edge & 2.32 from top edge at surface (far side up), down & to right to 5.60 from left & 1.50 from surfacem horizontal to right 4.00 inches, up to 11.60 fro left, 1.50 from surface, then right 4.06 then perpendicularly up 1.50 inches then right to edge; far side is marked "up" & "aft" near center top & with part number at center bottom
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Plastic, polyurethane
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polyurethane
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Material to be reticulated foam per sm-alc specification ms-mmrs-87-100
