TXT
묘사:
Cellular Plastic Material
MRC:
An indication of whether or not an object will remain substantially unchanged when subjected to extremely high temperatures.AAAU
Fire Retarding Characteristic:
Not fire retarding
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
25.440 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
4.000 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
27.300 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Aircraft, thunderbolt ii, a-10
MRC:
The condition of the item with respect to the texture of the surface.APEA
Surface Condition:
Rough
MRC:
An indication of the rated density of the item.BDNZ
Density Rating:
1.2 pounds per cubic foot
MRC:
The squeezing load an item can withstand without breaking at 25 percent deflection.CTLY
Compression Strength At 25 Pct Deflection:
0.35 pounds per square inch
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Rectangle with upper corners cut off at 30 degree angle 17.00 inches from bottom/short edge & with oval cutouts on these cutoff edges with 2.50 radii, with lower arcs centered 3.24 from outer edges (before cutoff) & 20.62 from bottom edges extending up on cutoff edge 7.50 inches to upper arc; 4 more cutouts: circle with 1.06 radius centered 4.17 from bottom & 1.92 from right edge along near surface & extending to bottom edge, a kidney shape with lower radius of 0.75, centered 2.10 from right edge & 8.00 from bottom & upper arc with 1.75 radius, centered 2.72 from right & 10.50 from bottom; nearly oval, with lower arc with 1.50 radius, 3.49 from left edge & 6.31 frombottom & upper arc with 1.75 rad, 2.72 from left & 10.50 from bottom & bump with 1.00 radius, centered 1.92 from left & 8.00 from bottom, a 3 inch tube extending from this cutout to the right downward to far surface then back up to top surface at bottom edge, 10.12 from left & 1.50 from top surface
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Plastic, polyurethane
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polyurethane
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Material to be reticulated foam per sm-alc specification ms-mmrs-87-100
