TXT
묘사:
Cellular Plastic Material
MRC:
An indication of whether or not an object will remain substantially unchanged when subjected to extremely high temperatures.AAAU
Fire Retarding Characteristic:
Not fire retarding
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
25.440 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
4.000 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
27.140 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Aircraft, thunderbolt ii, a-10
MRC:
The condition of the item with respect to the texture of the surface.APEA
Surface Condition:
Rough
MRC:
An indication of the rated density of the item.BDNZ
Density Rating:
1.2 pounds per cubic foot
MRC:
The squeezing load an item can withstand without breaking at 25 percent deflection.CTLY
Compression Strength At 25 Pct Deflection:
0.35 pounds per square inch
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Rectangle with upper corners cut off at 30 degree angle 20.08 from bottom/short edge & with oval cutouts on both cutoff edges, with 2.50 radii & lower arcs centered 27.14 from bottom edge, then extending along cutoff edge 7.00 inches to upper arc; 2 more cutouts: rounded trapezoid along left edge, lower right corner rounded to radius of 1.75, centered 3.84 from left edge & 6.08 from bottom & upper rt corner with 1.75 radius centered 2.72 from left & 10.84 from bottom; kidney shape, with lower arc with 1.00 radius, 1.72 from righ & 8.09 from bottom, upper arc with radius of 1.75, 2.72 from right & 10.84 from bottom; near side is marked: "up" & "aft" in upper center right area & with part number centered below it; far side has "up" & "fwd" in upper right center (far side up)
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Plastic, polyurethane
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polyurethane
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Material to be reticulated foam per sm-alc specification ms-mmrs-87-100