부품 정보
Hose assembly, signal air-valve
TXT
묘사:
Nonmetallic Hose Assembly
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Round
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
0.500 inches
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
140.0 degrees fahrenheit single response
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Turbine encl
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.AHNC
Connection Style:
Nut assembly with inverted flare and gasket 1st end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.AHNC
Connection Style:
Swivel nut, inverted flare 2nd end
MRC:
The physical configuration of the outside of the end connection.AKUU
End Connection Design:
Elbow 1st end
MRC:
The physical configuration of the outside of the end connection.AKUU
End Connection Design:
Straight 2nd end
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Threaded internal tube 2nd end
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Threaded internal tube 1st end
MRC:
The material and formation identifying the structural characteristic/s/ of the item and location.CQCS
Layer Composition And Location:
1st layer molded polytetrafluoroethylene and outer layer molded polytetrafluoroethylene
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
100.0 pounds per square inch
MRC:
The angle of the end surface upon which the mated surface seats.CQRB
Seat Angle:
37.0 degrees 1st end
MRC:
The angle of the end surface upon which the mated surface seats.CQRB
Seat Angle:
37.0 degrees 2nd end
MRC:
The angle that the flow is turned from the straight flow.CRFY
Flow Angle:
90.0 degrees 1st end
MRC:
The means used and the measurement of the longest dimension of an item.CRXX
Measuring Method And Length:
37.250 inches excluding end fittings
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Stainless stl fittings may be substituted by all stl fittings. This hose assembly consists of the following: elbow 90 swivel, sae 37 degrees jic, c.S., cad pl, p/n 190772-8s, qty. 1; swivel, sae 37 degrees jic, 316 s.S., p/n 190600-8c, qty. 1; hose, 1/2 inch, extruded polytetrafluoroethylene, single s.S. Braid, p/n 2807-8, qty. 1.
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Air single response
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
81381-631001-2b manufacturers specification
