부품 정보
With 2-0.406 min/0.437 maximum in diameter holes and with protective finish
MRC:
The process used in manufacturing the item.AARN
Fabrication Method:
Extruded
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
1.000 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.500 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
0.750 feet
Left Side Flange Thickness:
0.250 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the basic appearance of the item.AGTA
Basic Shape Style:
Angle
Fillet Radius Where Left Flange Joins Base Flange:
Between 0.030 inches and 0.060 inches
Base Flange Thickness:
0.250 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first tip.CMZY
First Tip Style:
Square end
MRC:
An indication of whether or not the second tip is identical to the first tip.CNQJ
Second Tip Relationship To First Tip:
Identical
Left Inside Angle:
90.0 degrees
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Aluminum alloy, astm b221, alloy 5083
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy, astm b221, alloy 5083
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
19207-12299294-2 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
MRC:
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.ZZZT
Specification Or Standard:
Alloy 5083