MRC:
The process used in manufacturing the item.AARN
Fabrication Method:
Any acceptable
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.810 inches
Left Side Top Flange Thickness:
0.060 inches
Right Side Top Flange Thickness:
0.060 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the basic appearance of the item.AGTA
Basic Shape Style:
T shape
Leg Thickness:
0.060 inches
Left Side Top Flange Distance To Center Of Both Flanges:
0.845 inches
Right Side Top Flange Distance To Center Of Both Flanges:
0.845 inches
Fillet Radius Where Top Left Flange Joins Web Flange/leg:
0.090 inches
Fillet Radius Where Top Right Flange Joins Web Flange/leg:
0.090 inches
Top Flange Width:
1.750 inches
MRC:
The weight of the item with respect to a unit of measure.BRFD
Weight Per Unit Measure:
0.024 pounds per piece
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first tip.CMZY
First Tip Style:
Square w/ inner and outer corner radii
First Tip Inner Radius:
0.010 inches
First Tip Outer Radius:
0.010 inches
MRC:
An indication of whether or not the second tip is identical to the first tip.CNQJ
Second Tip Relationship To First Tip:
Identical
MRC:
An indication of whether or not the third tip is identical to the preceding tips.CNQL
Third Tip Relationship To Preceding Tips:
Identical w/first tip
Right Top Inside Angle:
90.0 degrees
Left Top Inside Angle:
90.0 degrees
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Aluminum alloy, qq-a-200/3 and aluminum alloy, qq-a-200/13
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 2024 and aluminum alloy 7178
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-200/3 federal specification 1st material response and qq-a-200/13 federal specification 2nd material response
