부품 정보
Item has 4 holes no.8-36-unf-2b
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Circular recess
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
1.500 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
2.375 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.750 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, four holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
3.000 inches
MRC:
A measurement of a straight line from the midpoint of a rounded corner to its periphery.ADNU
Corner Radius:
0.875 inches
Distance Between Holes Along Length:
1.875 inches
Distance Between Holes Along Width:
1.625 inches
Distance From First Hole Centerline To End Along Length:
0.563 inches
Distance From First Hole Centerline To End Along Width:
0.375 inches
First Recess Inside Height:
0.188 inches
Second Recess Inside Height:
0.500 inches
MRC:
A measurement of the line segment extending from the center of a circle or sphere to the curve of an inside corner.ADPQ
Inside Corner Radius:
0.125 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.125 inches
First Recess Diameter:
2.000 inches
Outside Corner Radius:
0.125 inches
Body Outside Radius:
0.250 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Threaded fastener
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Threaded hole
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 355.0
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-601 federal specification single material response
