부품 정보
Gasket cross scction shall be continuous at seam no more than one seam is permissible; joined seam tensile strength and ultimate elongation before and after oven aging shall be not less than 80 percent of the requirements specified on zz-r-765 and tested per fed-std-601, method 4311
TXT
묘사:
Rubber Round Section
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Circular
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
35.0 shore durometer a and 45.0 shore durometer a
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-80.0 degrees fahrenheit and 425.0 degrees fahrenheit
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
Between 319.500 inches and 320.500 inches
MRC:
The condition of the item with respect to the texture of the surface.ADTX
Surface Condition:
Smooth both sides
MRC:
The length of a straight line which passes through the center of a cross section,and terminates at the outside circumference.ADVL
Cross Section Outside Diameter:
Between 0.441 inches and 0.447 inches
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Silicone rubber, zz-r-765, class 2b, grade 40
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber silicone class q
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Zz-r-765, class 2b, grade 40 federal specification single material response
