부품 정보
Steel bushing with a polytetrafluoroethylene liner bonded to od of body and id of inner race member to form 0.2500 in. Bore, shank has 2 mounting holes 0.2520 in. Id and 0.2290 in. By 0.3550 in., extension on top of rod end body with 0.2180 in. Hole through flat section
TXT
묘사:
Rod End Plain Bearing
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.AAZF
Shank Style:
Solid, unthreaded
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 2.8200 inches and 2.8800 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 0.2495 inches and 0.2500 inches
Outer Member Outside Diameter:
1.1000 inches
Bore Center To Shank End Distance:
Between 2.2700 inches and 2.3300 inches
Outer Member Width:
Between 0.3700 inches and 0.3800 inches
Inner Member Width:
Between 0.5570 inches and 0.5620 inches
MRC:
The limiting radial load which the item can carry at rest without permanent deformation of the stressed surface or the danger of fracture.AGKP
Static Radial Load Rating:
1500 pounds
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polytetrafluoroethylene race liner
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 440c inner member
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel rod end body
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium rod end body
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Ball type
