MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
External locking flange
MRC:
A measurement of the longest dimension of the chamfer,in distinction from width.AAZP
Chamfer Length:
0.062 inches inside left corner
MRC:
A measurement of the longest dimension of the chamfer,in distinction from width.AAZP
Chamfer Length:
0.062 inches inside right corner
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.000 inches
MRC:
The length of a straight line which passes through the center of a flange,and terminates at the circumference.ABKK
Flange Diameter:
Between 5.375 inches and 5.377 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
5.359 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
Between 3.360 inches and 3.362 inches
Left Side Flange Thickness:
0.281 inches
Right Side Flange Thickness:
0.250 inches
Distance Between Flanges:
0.469 inches
End To Flange Distance:
0.975 inches
Smallest External Anchor Flange Radius:
2.625 inches
Largest External Anchor Flange Radius:
2.813 inches
Distance Below Centerline:
0.250 inches
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Chamfered inside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Chamfered inside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square outside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square outside right corner
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches all surfaces
MRC:
The included angle of the chamfer(s).CSYT
Chamfer Angle:
45.0 degrees inside left corner
MRC:
The included angle of the chamfer(s).CSYT
Chamfer Angle:
45.0 degrees inside right corner
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
