부품 정보
Grumman aerospace corporation a10 aircraft
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Electrically shielded, partial insulator, gasket seat
MRC:
The opposition to the flow of direct current offered by an item,expressed in ohms.AFYV
Dc Resistance Rating In Ohms:
10000.0
MRC:
A measurement of the longest dimension of the reach,in distinction from width.AHPM
Reach Length:
Between 0.484 inches and 0.516 inches
MRC:
Indicates the designed use of the item.ALBY
Usage Design:
Engine other than aircraft
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
Between 0.865 inches and 0.880 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the electrode.AYGA
Electrode Style:
B1 single flat shell ground electrode (see also style 4)
MRC:
Designates the thread diameter,series/type,and number of threads per measurement scale,and the location.AYGB
Thread Size And Series/type Designator And Location:
5/8-24 unef shielding err-100
MRC:
Designates the thread diameter,series/type,and number of threads per measurement scale,and the location.AYGB
Thread Size And Series/type Designator And Location:
18-1.5mm base err-100
MRC:
The average effective pressure rating for which the item is designed.AYGF
Mean Effective Pressure Rating:
135.0 pounds per square inch
Seat Major Diameter:
Between 0.865 inches and 0.980 inches
Height Above Mounting Surface:
2.875 inches
Top To Terminal Contact Distance:
Between 1.220 inches and 1.320 inches
Top To Shield Thread Distance:
Between 0.094 inches and 0.156 inches
Shield Thread Length:
0.375 inches
Barrel Inside Diameter:
Between 0.505 inches and 0.510 inches
Terminal Sleeve Inside Diameter:
Between 0.301 inches and 0.316 inches
MRC:
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.ZZZT
Specification Or Standard:
1 type and a class
