부품 번호 X10619

Hydraulic Brak Cylinder Assembly
묘사

Fastener socket ucc

재고 가용성  제품 상태 코드

부품 번호 x10619 다음과 같은 수량과 조건으로 재고가 있습니다.

  • NS: 989
  • NE: 2186
  • AR: 1
  • SV: 1

참고: 이 항목의 가용성은 마지막으로 업데이트되었습니다. 07/29/2024 그 이후로 변경되었을 수 있습니다. 최신 가격 및 가용성에 대한 견적을 요청하십시오.

가격 및 가용성

이 NSN의 현재 가격 및 가용성에 대해 이 양식을 제출하십시오.
부품 번호:
양:
이메일 주소:
전화:
참조:
회사:
이름:

우리는 귀하의 정보를 누구에게도 공유하거나 판매하지 않습니다.
사생활 | 용어

All major credit cards accepted as well as gov. p-cards

이 제품의 과거 가격은 40.88 and 55.188 USD. 수량, 가용성, 상태, 리드 타임 및 품목 중단 가능성에 따라 최신 견적을 제공할 때까지 가격을 보장할 수 없습니다.

부품 번호
비무장화
수명
UOM
NIIN
부품 번호:
x10619
비무장화:
No
수명:
N/A
측정 단위:
1 EA
NIIN:
003834830

부품 정보
Weapon system essential

NSN
국가 주식 번호:
2530-00-383-4830 2530003834830
TXT
묘사:
Hydraulic Brak Cylinder Assembly
INC
INC
아이템 이름 코드:
10862
MRC:
The basic material of which the body is fabricated.AAFZ
Body Material:
Iron, cast
MRC:
The provision/s/ for mounting the item.ABDR
Mounting Provision:
Threaded mounting holes
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
2.688 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
3.000 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
1.500 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
3930-00-958-3682
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance,and an external or internal threaded mounting facility.AKBM
Mounting Facility Thread Class:
2b
MRC:
The direction of the threads of a mounting facility when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AKBN
Mounting Facility Thread Direction:
Right-hand
MRC:
Indicates the type of bore used on the item.ASBP
Bore Type:
Straight
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting provision(s).BBBW
Mounting Provision Arrangement Style:
Two hole
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Bleeder valves and rubber boot
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale applied to a mounting facility diameter.CDTD
Mounting Facility Thread Series Designator:
Unc
MRC:
The length of a straight line which passes through the center of the mounting facility which would bound the crest of an external thread or the root of an internal thread.CDTF
Mounting Facility Thread Diameter:
0.375 inches
MRC:
The number of threads on the mounting facility per linear inch measured on a line parallel to the thread axis.CDTG
Mounting Facility Thready Qty Per Inch (tpi):
16
MRC:
An indication of the design characteristics of the item.CKSD
Design Characteristics:
Single acting single cylinder
MRC:
Indicates the type of mounting and the location on the item.CLML
Mounting Type And Location:
Flange center section
MRC:
The length of the threaded portion of the mounting facility.CLMN
Mounting Facility Thread Length:
0.625 inches
MRC:
None.CLMR
Center To Center Distance Between Mounting Provisions:
2.125 inches
MRC:
Indicates the location and number of ports on the item.CLMS
Port Location And Quantity:
1 center section
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the port.CLMT
Port Style:
Gasket seal single port
MRC:
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the port.CLMW
Port Thread Series Designator:
Unf single port
MRC:
The length of a straight line which passes through the center of the port and would bound the crest of an external thread or the root of an internal thread.CLMX
Port Thread Diameter:
0.500 inches single port
MRC:
A measurement of the number of screw threads on the port per linear inch,including incomplete threads,on a line parallel to the thread axis.CLMY
Port Thready Qty Per Inch (tpi):
20 single port
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal port thread.CLNB
Port Thread Class:
2b single port
MRC:
The number of bleeding features included.CLND
Bleeding Feature Quantity:
1
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Feat

{lang[cimilar]} Hydraulic Brak Cylinder Assemblies

« Vehicular Brake, Steering, Axle, Wheel and Track Components {lang[catalog]}
지금 비교»
맑다 | 숨기다