TXT
묘사:
Electric Windshield Wiper Motor
MRC:
The number of terminals for providing electrical connection to the item.AARA
Terminal Quantity:
1
MRC:
Indicates the type of terminals for providing electrical connection to the item.AARB
Terminal Type:
Stud
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.200 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
1
MRC:
Indicates the type of switch included in the item.AEEA
Switch Type:
Integral
MRC:
An indication of whether or not a device used to open or close an electrical circuit is included with the item.AEZD
Switch:
Included
MRC:
The length of a straight line which passes through the center of a sleeve,and terminates at the circumference.AJSE
Sleeve Diameter:
0.625 inches
MRC:
A measurement of the longest dimension of the sleeve,in distinction from width.AMCA
Sleeve Length:
1.000 inches
MRC:
Indicates the design type of the item.APGF
Design Type:
Oscillating arm
MRC:
An indication of whether or not a manual operation facility is provided.APHP
Manual Operation Facility:
Not provided
MRC:
Indicates the type of speed control for which the item is designed.ASFF
Speed Control Type:
Single
MRC:
The means of attaching the item.AXGY
Mounting Method:
Bracket and threaded sleeve
MRC:
An indication of whether or not a fuse is included.AZQG
Fuse:
Not included
MRC:
The angle of throw,expressed in degrees.BJYB
Throw Angle In Deg:
85.0
MRC:
A measurement of the longest dimension of an actuating shaft,in distinction from width.BJYD
Actuating Shaft Length:
0.406 inches
MRC:
The length of a straight line which passes through the center of the largest portion of an actuating shaft,and terminates at the circumference.BJYF
Actuating Shaft Largest Diameter:
0.545 inches
MRC:
Indicates the type of end connection provided on the actuating shaft.BJYG
Actuating Shaft End Connection Type:
Serrated
MRC:
The physical configuration of the serrations.BJYH
Serration Shape:
Straight
MRC:
An indication of whether or not the mounting hole is threaded.BJYJ
Mounting Hole Thread Provision:
Unthreaded
MRC:
Designates the thread diameter and number of threads per measurement scale of a threaded sleeve.BJYL
Sleeve Thread Size:
0.625-24
MRC:
A designation indicating the diameter-pitch combinations applied to a sleeve.BJYM
Sleeve Thread Series Designator:
Unef
MRC:
The direction of the sleeve thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.BJYN
Sleeve Thread Direction:
Right-hand
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
12.0
