MRC:
Indicates whether or not a ferrous alloy object has been subjected to a process whereby the outer portion is made substantially harder than the inner portion or core.AASG
Casehardening Indicator:
Casehardened
MRC:
The measurement of the chamfer angle,expressed in degrees.AATE
Chamfer Angle In Deg:
45.0
MRC:
A measurement of the longest dimension of the chamfer,in distinction from width.AAZP
Chamfer Length:
Between 0.015 inches and 0.020 inches
MRC:
A measurement taken at right angles to the length of a groove,in distinction from thickness.ABGF
Groove Width:
Any acceptable
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
16.688 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.504 inches
MRC:
A measurement of the longest dimension of the tapered portion of an item,in distinction from width.ABND
Taper Length:
1.000 inches
MRC:
The length of a straight line which passes through the center of the smallest circular cross section of the tapered portion,and terminates at the circumference.ABQA
Taper Minor Diameter:
Between 7.456 inches and 7.460 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
7.000 inches
MRC:
A measurement of the longest dimension of the body,in distinction from width.ADAQ
Body Length:
Any acceptable
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
7.750 inches
MRC:
A numeric value that reflects the hardness of a metallic item when used in conjunction with a hardness rating scale.AETC
Metallic Hardness Rating:
92.0 rockwell b and 101.0 rockwell b
MRC:
The length of a straight line which passes through the center of a flange,and terminates at the outside circumference.AHTC
Flange Outside Diameter:
Between 8.123 inches and 8.125 inches
MRC:
Indicates the design type of the item.APGF
Design Type:
Wet
MRC:
The angle of the bottom chamfer,expressed in degrees.AYSK
Bottom Chamfer Angle In Deg:
45.0
MRC:
A measurement of the longest dimension of the bottom chamfer,in distinction from width.AYSM
Bottom Chamfer Length:
0.031 inches
MRC:
An indication of whether or not a valve recess(es) is included.BPPS
Valve Recess:
Not included
MRC:
An indication of whether or not a top inside chamfer is included.BPPT
Top Inside Chamfer:
Included
MRC:
An indication of whether or not a bottom inside chamfer is included.BPPW
Bottom Inside Chamfer:
Included
MRC:
An indication of whether or not a top intake port is included.BPPX
Top Intake Port:
Not included
Largest Outside Diameter Under Flange:
7.000 inches
Grooved Portion Outside Diameter:
Between 7.752 inches and 7.753 inches
Grooved Portion Width:
0.553 inches
Groove Radius Depth:
0.031 inches
MRC:
An indication of whether or not an intake hole(s) is included.BQBF
Intake Hole:
Not included
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Iron alloy
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Iron alloy
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Wet, two seal grooves, installation chamfer
