부품 정보
Holes along width one side only, recess bend on opposite side
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Recess, same shape as the periphery
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.188 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
13.932 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.060 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, multi holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
6.070 inches
Hole Quantity Along Length:
6
Hole Quantity Along Width:
4
Distance Between Holes Along Length:
2.125 inches
Distance Between Holes Along Width:
4.000 inches
Distance From First Hole Centerline To End Along Length:
0.945 inches
Distance From First Hole Centerline To End Along Width:
0.966 inches
First Recess Inside Height:
0.375 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.060 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Special
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
7310-01-295-7479, tray ration heating system (trhs)
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 304
