부품 정보
Does not includeboom or cable assembly
TXT
묘사:
Dynamic Microphone
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Headset type
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
1.000 inches
MRC:
The identifying numeric code of the originator that controls or manufactures the electrical connector receptacle.AEEE
Connector Manufacturer Code:
80063
MRC:
The minimum and maximum frequencies to which the item will respond,expressed in hertz.AFYW
Frequency Response Range In Hertz:
+200.0/+6000.0
MRC:
The minimum and maximum frequencies to which the item will respond,expressed in hertz.AFYW
Frequency Response Range In Hertz:
+200.0 to 6000.0
MRC:
The total opposition /resistive and reactive/ to the flow of alternating current.AFYY
Impedance Rating:
5.0 ohms
MRC:
The rating indicating the ratio of the output voltage or power to the input voltage or power at a specified reference energy level,expressed in decibels.AFZA
Output Sensitivity Rating In Decibels:
-74.0
MRC:
The electrical output rating and sound pressure input rating which are used as a base reference for the measurement of the sensitivity of an item.AFZB
Output Sensitivity Rating Reference:
0.0002 dynes per sq centimeter
MRC:
An indication of whether or not the item requires a specific polarity for connection into the operating circuit.AGAX
Polarity Connection:
Not required
MRC:
Indicates the specific type of sound pickup which determines the performance of the item.AGAY
Sound Pickup Directional Type:
Unidirectional
MRC:
An indication of whether or not a feature is included to enable the item to cancel undesirable background sounds.AGAZ
Noise Canceling Feature:
Included
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
1.235 inches
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81349-mil-prf-26542/2 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
