부품 정보
V belt sheave bushin (motor) ; split taper bushings
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
2.8750 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
Between 3.8750 inches and 4.0000 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Hydraulic teststand htb-50e
MRC:
A measurement taken at right angles to the length of a flange,in distinction from thickness.AGFF
Flange Width:
0.6250 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Outside flange diameter is 5" and some fraction which is not determinable with the tech data in possesion; the outside diameter is tapered where the small end in 3.8750" and the large end is 4.0000"; there is a keyway in the bushing; and three cap screw holes; and two other holes all around the flange portion; the bore range is 1.125"- approximately 2.75" but is a bit unreadable on the tech data
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
22a-1 split, external flange one end, internal flange one end
