TXT
묘사:
Gaseou Pressure Equalizing Valve
MRC:
The basic material of which the body is fabricated.AAFZ
Body Material:
Aluminum alloy
MRC:
The maximum pressure at which an item is designed to operate.AAJJ
Maximum Operating Pressure:
3.0 pounds per square inch
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off. plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the outside surface.AAJP
Outside Surface Treatment:
Anodized
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Single connection, straight flow
MRC:
Items furnished as accessories which are not specified elsewhere.ABFF
Furnished Items:
Manual unloader on pressure side and gasket and nut and washer
MRC:
The type of service with which the item is designed to be used.ACKL
Media For Which Designed:
Air
MRC:
A narrative description of the type of end connection.ACKM
First End Connection Type:
Threaded external boss
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ACKN
First End Style Designator:
External seat for gasket seal
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.ACLK
First End Thread Class:
2a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ACLL
First End Thread Direction:
Right-hand
MRC:
The element,compound,or mixture of which the seating surfaces are fabricated.ACSH
Seat Material:
Aluminum alloy
MRC:
The part that controls the flow through the item.ADQU
Flow Control Device:
Disk, flat
MRC:
The element,compound,or mixture of which the flow control device is fabricated.ADQV
Flow Control Device Material:
Aluminum alloy
MRC:
The number of end connections included in the item.ADQZ
End Connection Quantity:
1
MRC:
The means of closing the item when inlet pressure decreases.ADSU
Disk Loading Method:
Spring
MRC:
The predetermined pressure at which the item is calibrated to open.ADSV
Opening Pressure Setting:
2.0 pounds per square inch
MRC:
Indicates the type of valve venting design,whether for use in a closed system or for venting to the atmosphere.AFLE
Valve Venting Design Type:
Atmospheric
MRC:
Indicates the type of valve relief design,whether for pressure or vacuum relief or for both pressure and vacuum relief.AFLF
Valve Relief Design Type:
Pressure and vacuum
MRC:
A designator distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.CQMM
First End Thread Series Designator:
Npt
MRC:
The designation which is used for the purpose of general identification of the nominal thread size.CQYM
First End Thread Size:
0.125 inches
