부품 번호 SUM3597

Sleeve Bushing

가격 및 가용성

이 NSN의 현재 가격 및 가용성에 대해 이 양식을 제출하십시오.
부품 번호:
양:
이메일 주소:
전화:
참조:
회사:
이름:

우리는 귀하의 정보를 누구에게도 공유하거나 판매하지 않습니다.
사생활 | 용어

All major credit cards accepted as well as gov. p-cards

이 제품의 과거 가격은 264.98 and 357.723 USD. 수량, 가용성, 상태, 리드 타임 및 품목 중단 가능성에 따라 최신 견적을 제공할 때까지 가격을 보장할 수 없습니다.

부품 번호
비무장화
수명
UOM
NIIN
부품 번호:
sum3597
비무장화:
No
수명:
N/A
측정 단위:
1 EA
NIIN:
011902255

부품 정보
Left end inside diameter countersunk 0.305 in. Diameter by 90.0 deg; right end inside diameter counterbored 0.315 in. Dia, 0.100 in. Deep; outside diameter of flange milled flat on two sides to 0.750 in. Wide; lower left corner of flange notched 0.430 in. Below horizontal centerline, 0.220 in. From vertical centerline

NSN
국가 주식 번호:
3120-01-190-2255 3120011902255
TXT
묘사:
Sleeve Bushing
INC
INC
아이템 이름 코드:
13206
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
0.4000 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
0.2860 inches
MRC:
The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.AEPR
Flange Outside Diameter:
1.8600 inches
MRC:
A measurement taken at right angles to the length of a flange,in distinction from thickness.AGFF
Flange Width:
0.0600 inches
MRC:
None.AJFM
End To Flange Distance:
0.0400 inches
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square center flange left body corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square center flange outside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square center flange outside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square inside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square inside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square outside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square outside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Undercut center flange right body corner
MRC:
None.CTSN
Left End Body Diameter:
0.6250 inches
MRC:
None.CTTG
Right End Body Diameter:
Between 0.5012 inches and 0.5016 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Bs 970 325s21, fscm k5294 mfr ref single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
0722-568, fscm k5294 mfr ref single treatment response

{lang[cimilar]} Sleeve Bushings

« Bearings Plain Unmounted {lang[catalog]}
지금 비교»
맑다 | 숨기다