부품 정보
(inavy)clamp block, aircraft
TXT
묘사:
Section Block Clamp
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.830 inches
Distance From Center Of Mounting Hole To Edge Along The Width:
0.250 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Hydraulic system; f/a-18e/f
MRC:
The facility for mounting the item.AZGM
Mounting Facility:
Clamp
MRC:
A measurement from the bottom to the top of a block,in distinction from depth.BYGG
Block Height:
0.250 inches
MRC:
The length of a straight line which passes through the center of the cable for which the item is designed,and terminates at the circumference.CBSM
Cable Diameter For Which Designed:
0.250 inches all holes
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Agav
MRC:
The number of clamping holes provided.CWTD
Clamping Hole Quantity:
2
MRC:
The length of a straight line which passes through the center of a clamping hole,and terminates at the circumference.CWWM
Clamping Hole Diameter:
0.266 inches all holes
Center To Center Distance Between First And Sixth Clamping Holes:
1.030 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Clamp block-coiled tube support, double line; requires 2 st9m591-4p for complete line support installation
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-200/8 federal standard all material responses
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Primer
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Fed-std-595 federal standard all treatment responses
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Rectangular
